Part No.Frequency Range(MHz)Gain(dB)Gain Flatness(dB)S11(dB)S22(dB)NF(dB)OP1dB(dBm)OIP3(dBm)Tone Power(dBm)Vs(V)Ic(mA)Packages2pALN0859M3824-894550.4-18-100.7294610540025x13x3.0 SMTs2pALN1810M31710-1910360.6-20-200.7284210540025x13x3.0 SMTs2pALN2045M31920-2170360.4-18-100.7294412540025x13x3.0 SMTs2pALN2540M32525-255535...

Part No.Frequency Range(MHz)Gain(dB)Gain Flatness(dB)S11(dB)S22(dB)NF(dB)OP1dB(dBm)OIP3(dBm)Tone Power(dBm)Vs(V)Ic(mA)Packages2pACL4275T24200-4350210.8-18-101.251430455010x10x3.8 SMTs2pACL4300T24200-4400200.9-18-101.251430455010x10x3.8 SMTs2pACL4400T24300-4500200.8-15-121.51430455010x10x3.8 SMTs2pACL5000T24900-510018.5...

Part No.Frequency Range(MHz)Gain(dB)Gain Flatness(dB)S11(dB)S22(dB)NF(dB)OP1dB(dBm)OIP3(dBm)Tone Power(dBm)Vs(V)Ic(mA)Packages2pALN0070WT60-80220.2-18-100.91727454010x10x3.8 SMTs2pALN0140WT125-155250.2-12-180.72131457310x10x3.8 SMTs2pALN0195AT180-210210.5-20-1511832456510x10x3.8 SMTs2pALN0196AT180-210230.5-14-141183245...

The CATV amplifier has wide-band and low noise and high linearity (CSO, CTB) feature over 5-1000 MHz; 5-400 MHz and 50-1000 MHz. For various requirement of the market, it provides various application circuits; the flat gain, the positive gain slope, the lowest return loss, and the lowest DC power consumption, etc. For ...

The GPS LNA is a small-signal LNA with the small DC current and mostly voltage less than 3.3 V. The products are providing the different gain depending on the system of the GPS applications. Usually for smaller GPS module application, the product has the smallest number of extra off-chip matching component so that the ...

The intermediate frequency (IF) amplifier MMICs have wide selection of the gain and higher linearity (OIP3) over the frequency range of 70-450 MHz in order to meet the variety of requirement in the market. Some of them has also relatively lower NF for the system requiring such a low NF performance even for the IF ampli...

The medium power amplifier MMICs are packaged in the low cost plastic so that they could deliver the output power up to 33 dBm (2 W). The product can be used as the final stage in the transmission part of a small output power system as well as the driver amplifier in front of the higher output power final stage. Design...

The gain block amplifier MMICs have wide range of the gain (S21) over wide range of frequency with different output power and OIP3, which are designed in pursuit of higher gain with higher linearity at lower DC power consumption. Features 5-8000 MHzInternally Wide-band MatchedHigh GainHigh Linearity Figure of MeritEa...