Mi-Waves’ 620 series E/H plane tuners are hybrid tee section available in standard waveguide sizes for operation from 12.4 to 220 GHz. The devices feature micrometer-driven tunable shorts in both the Eplane and H-plane arms for accurate tuning and reproducible settings. The internal short circuits are non-con...

Mi-Waves’ 610 series triple hybrid rings consist of three single hybrid rings integrated into one compact component. This device provides four 6 dB outputs for use in dual balanced mixers and power divider/ combiner circuits. Model Number600K600A 600B 600U600V 600E 600W 600F600D600GIsolation (dB) Max.202020...

Mi-Waves’ 605 series short slot hybrid is a narrow wall 3 dB coupler, available in standard wave-guide sizes from 18.0 to 110.0 GHz. This compact, fourport device is inherently matched and well-suited for balanced mixers and power splitting circuits. There is a 90 degree phase difference between the output si...

Mi-Waves’ 600 series hybrid rings are four-port, inherently-matched 3 dB power splitting devices. Available in standard waveguide sizes from 18.0 to 220.0 GHz, these units are capable of both in-phase and out-of-phase splitting. Model Number600K600A 600B 600U600V 600E 600W 600F600D600GFrequency Band (GHz)18...

Mi-Waves’ 370 series flanged waveguide and 371 series unflanged waveguide is available in standard sizes from 12.6 to 320 GHz. The 370 series waveguide sections are fitted with Mi-Waves’ standard male/female flanges. Both waveguide types are manufactured primarily in copper. Standard WaveguideMIL-W-...

Mi-Waves’ 355 series rotary joints are available in standard circular waveguide sizes from 11.6 to 150 GHz. Each rotary joint consists of two circular waveguide sections mounted on ball bearings. Connections to the guides are made at standard male and female circular flanges. Precise alignment of the waveguid...

Mi-Waves’ 530 series manual switches are designed for use in standard millimeter wave frequency bands from 12.4 to 220 GHz. Each unit will operate over the full waveguide bandwidth with minimum insertion loss, minimum VSWR, and maximum isolation between coupled and uncoupled waveguide sections. Model Number53...

Mi-Waves’ 145 series polarization switch is a TE11 mode device with both the input and output in circular waveguide. It is equipped with a standard pin-aligned circular flange similar to most of Mi-Waves’ standard 200 series antenna components.Typical units are continuously adjustable over &plus...